Ask a Question

Printing the nozzle check pattern using the Reset or Resume button - S530D

Article ID: ART126177 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Printing the nozzle check pattern using the Reset or Resume button - S530D

Solution

Untitled Document

Printing a Nozzle Check Pattern

You can print a nozzle check pattern by pressing the <RESET> button of the printer.

1. Make sure the printer is on.

2. Load letter size paper.

3. Keep the <RESET> button pressed down, and release it when the power lamp blinks twice.


4. The Nozzle Check Pattern prints



5. Examine the patterns.

  • If the lines in the first pattern are broken, the print head must be cleaned.

  • If the vertical lines in the second pattern stand out, the print head position must be aligned.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments