Setting up the wireless settings when a wireless network is already in use (Infrastructure mode)
Setting up the wireless network settings.
|
|
|
|
|
To select items from the camera's LCD monitor, press the camera's button (as shown in the picture below) to the left, right, top, or bottom.
|
|
|
|
|
|
|
|
[Camera Wireless Setup] from the supplied Solution Disk must be installed on your computer for setting up the wireless settings.
|
|
|
|
Please make sure that the computer and the wireless LAN router are connected correctly, and setup for the wireless LAN router is completed.
|
|
|
|
Some of the screenshots that appear on this page contain a specific camera model name, however the actual model name varies depending on the camera used.
|
1. Connect the camera's DIGITAL terminal and computer's USB port using the interface cable supplied with your camera.
DIGITAL terminal on the camera
Interface cable
USB port on the computer
2. Turn the camera's <Mode Switch> to
(Playback), and then turn the camera's power on.
3. The following window appears.
Select [Canon CameraWindow Download Images From Canon Camera].
Click [OK].
4. [CameraWindow] appears.
5. Press the camera's
(MENU) button.
6. The following screen appears in the camera's LCD monitor.
Select [
(Wireless)] in the camera's LCD monitor.
Select [Reg. Target Device].
7. Press the camera's
(FUNC./SET) button.
8. The following screen appears in the camera's LCD monitor.
9. The computer displays [Let's start configuring your wireless network settings] in the window that appears.
Read the instructions, and then click [Next].
10. The [Please select the configuration method] screen appears.
Select [Simple Mode].
Click [Next].
11. The [Which wireless network environment do you want to connect the camera to?] screen appears.
Select [I am using an access point].
Click [Next].
12. The [Adding a camera to your wireless network] screen appears.
Input setting information for [Network Name (SSID)], [Network Authorization - Encryption], [Encryption key (Network key)], and [Key Index]. Check the settings screen on the router you are using for the input items. If the items are automatically set, please make sure that the information set is the same as what appears on the router's settings screen.
Click [Enter].
For information on how to check the wireless LAN router settings, please contact the router's manufacturer.
13. The [Registering on your camera] screen appears.
Enter a name for [Registration Name]. The name input here will be displayed in the camera's [Connected To] category.
Click [Next].
14. The [Printing your settings] screen appears.
Check the items that you set.
Click [Next].
15. The [Settings Completed] screen appears.
16. The following screen appears on the camera's LCD monitor.
The name entered as [Registration Name] in Step 13 appears here.
The name entered as [Network Name (SSID)] in Step 12 appears here.
17. Press the camera's (FUNC./SET) button.
18. Press the camera's
(MENU) button to return to the playback mode.
19. Turn the camera's power off, and then disconnect the interface cable.
