Normal Copying-PC 100 Series

Article ID: ART126389 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Normal Copying


Normal Copying

Use the following procedure when making normal copies.

  1. Turn the copier's power switch ON.
    On the control panel, will light up in the Number of Copies Indicator.

  2. Adjust the paper guides to fit the size of the copy paper.

  3. Place the copy paper into the multi-stack tray.

    Even out the edges of the copy paper before placing it into the multi-stack tray.

  4. Place the material to be copied face down on the platen glass.

  5. Gently close the platen cover.

  6. When copying anything out of the standard mode, be sure to set the copy exposure and number of copies.

    The following is the standard mode:
    Copy number = 1
    Copy exposure = automatic

  7. Press the key.
    The platen begins moving and copying begins.

    Press the key in order to stop or cancel the copy job.

  8. When you have finished copying, remove the original and turn the power switch OFF.

    If the copier will not be used for a long period of time, unplug the copier from its power source.

    If the copier has not been used for a long period of time, before operation move the platen by hand to the right, left and back to the center.
    Paper jams are most often caused by wrinkled or curled copy paper usage or by turning the power switch OFF while the copier is copying.
    Always turn on the power switch slowly.
    If the copier is not operated for a period of longer than 5 minutes after copying finishes, the power turns OFF automatically. (This is the Auto Power-Off Feature.)
    Do not copy with the platen cover left open, doing so will result in excessive toner consumption.
    A stack of copy paper 5 mm high (1/5 in. or up to 50 sheets of 20 lb-bound copy paper) can be inserted into the multi-stack tray at one time. Fan and even out the edges of the copy paper before placing it into the multi-stack tray.
    Every time the key is pressed the number of copies to be made increases by one. This can be repeated up to nine copies.
    Press the key to clear the copy quantity to one.
    When you have finished copying, do not leave unused copy paper in the multi-stack tray.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments