Ask a Question

Print Nozzle Check Pattern / Self Test from unit BJC-4000

Article ID: ART126761 | Date published: 05/12/2015 | Date last updated: 08/14/2015
 

Description

Printing Nozzle Check Pattern (Self Test) - BJC-4000

Solution

Untitled Document

Printer Self Tests

NozzleTest Pattern

  1. Power Off and Paper loaded.

  2. Press the FF an hold down then press the Power buttons and hold down until printer beeps twice, then release buttons.

Note: If you release the buttons before the second beep, printer prints a pattern of the character H.

DemoPrint Pattern

  1. Power Off and Paper loaded.

  2. Press the Online an hold down then press the Power buttons and hold down until printer beeps twice, the release buttons.

  3. To stop printing press and hold the On line button for one second. The printer will stop printing, eject paper, and go back on-line.

RipplePrint Pattern

  1. Power Off and Paper loaded.

  2. Press the Online, Print Mode an hold down then press the Power buttons and hold down until printer beeps once the release buttons.

  3. To stop printing press and hold the On line and the Print Mode button for one second. The printer will stop printing, eject paper, and go back on-line.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments