Installing the battery PowerShot SD700 IS and SD800 IS.

Article ID: ART126916

Date published: 05/12/2015

Date last updated: 08/14/2015

Solution / Answer: Installing the battery PowerShot SD550

Install Battery Pack NB-5L (supplied) as shown below.

Please charge the battery pack before you use it for the first time.

1. Slide the memory card slot / battery cover and open it (), ().

2. Push the battery lock in the direction of the arrow as shown () and insert the battery until it locks.

3. To remove the battery, push the battery lock in the direction of the arrow () and hold it while pulling the battery out.

4. Close the memory card slot/battery cover.

Please watch the loading slot area carefully as you insert and remove the battery pack.
Do not turn off the power or open the battery cover while the camera's indicator blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card.
Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may reset to the default settings if the battery pack has been removed for more than three weeks.

Please use an AC Adapter Kit ACK-DC30 (sold separately) for extended use of the camera.

	Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period. When the LCD monitor is off, this icon will display when you press any button other than the power or (Print/Share) button.
Change the battery pack	Battery charge is insufficient to operate the camera. Replace the battery pack immediately.

Rate this Article

Was this article helpful? Yes, This document is helpful No, This document needs a clearer explanation

Please provide your comments

Ask a Question

Models related to this article