Replace ink tank(s) S200

Article ID: ART126966 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Replace ink tank(s)


Installing Ink Tanks

When replacing the ink tanks, confirm that the new ink tanks are installed properly. If the ink tanks are not locked into place, paper may not be fed properly, or ink may not be supplied to the print head.

  1. Check that the printer is powered on and open the front cover.

  2. Wait until the print head moves to the center and stops.

  3. Remove the empty ink tank by pulling the release tab towards you, and then lifting the tank out.

  4. Remove the new ink tank from its package. Slowly push up the orange protective cap in the direction that the arrow indicates, and remove it.

  5. Insert the new ink tank to the print head by holding it at a slight angle. Press down on the top of the ink tank until a click sound is made.

  6. Check if the ink tanks are installed properly.

    Ink tanks installed correctly

    Ink tanks installed incorrectly

  7. Close the front cover.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments