Inserting and Removing a Memory Card Elura 100

Article ID: ART127509 | Date published: 05/12/2015 | Date last updated: 08/14/2015


Inserting and Removing a Memory Card Elura 100


Inserting and Removing a Memory Card Elura 100

You can use commercially available SD memory cards or MultiMediaCards (MMC) with this camcorder

Inserting the Card

  1. Set the power switch of <OFF> .
  2. Open the cover.
  3. Insert the memory card straight into the memory card slot and push it in until it clicks.
  4. Close the cover.
  5. If the memory card is not correctly inserted the cover will not close do not attempt to forcefully close the cover.
  6. Verify that the memory card is inserted in the correct direction.
  7. Turn on the camcorder.

Removing the Card

Do not forcefully remove the memory card without first pushing it in.
  1. Set the <POWER> switch to <OFF>. Make sure that the <CARD> access indicator is not flashing before you turn off the camcorder.
  2. Open the cover.
  3. Push the memory card in to release it.
  4. Remove the memory card.
  5. Close the cover.
  • Before using them, make sure to initialize all memory cards with this camcorder.
  • Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder.

Proper operation cannot be guaranteed for all memory cards.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments