How to use Auto PC Adjustment on the SX50

Article ID: ART127652 | Date published: 05/12/2015 | Date last updated: 08/17/2015


How to use Auto PC Adjustment on the SX50


Using the Auto PC Adjustment Function

This projector automatically selects a signal type (VGA, SVGA, XGA, SXGA, SXGA+, etc.) and makes optimum settings for the total number of dots and tracking depending on the connected computer (auto PC adjustment). (This function cannot be used when digital RGB is selected.)

When you switched to the computer mode using the [COMPUTER-1] or [COMPUTER-2] button, press the [AUTO PC] button. The auto PC adjustment becomes active to display images correctly.

For some computers, the auto PC adjustment does not work. In this case, you need to make settings (total dots, tracking, horizontal/vertical positions, horizontal/ vertical pixels, etc.) for the input signal.

  • The last used signal types are recorded for the [COMPUTER-1] and [COMPUTER-2] buttons respectively. When the projector is connected to the same computer, it can be used with the same settings as before simply by switching to the computer mode.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments