Basic Methods for Sending Faxes

Article ID: ART127747 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Basic Methods for Sending Faxes


Basic Methods for Sending Faxes

This section describes the flow of sending faxes.

1. Place documents.

2. Press [SEND/FAX] / [FAX].

The SEND/FAX indicator lights up and the machine enters the send standby mode.

3. Press [SEND/FAX] repeatedly to select <FAX>, then press [OK].

For the D1150, skip this step.

4. Use - , , [numeric keys] and [Tone] to specify the fax number.

If you enter a wrong number when specifying a fax number, go back to the wrong digit with .

5. Press [Start].

When you place the documents on the platen glass, press or to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending.

You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 4.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments