Basic Copying Method
This section describes the basic procedure for copying.
1. Place documents on the platen glass or load them in the ADF.
Close the ADF after placing your documents.
2. Press [COPY].
The COPY indicator lights up and the machine enters the copy standby mode.
note:
If you press and hold [OK] in the copy mode, a sample page will be printed.
3. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
- The copy quantity appears on the right side of the display.
- If you make a mistake when entering values, press [Clear] and enter the correct values.
note:
You cannot change the copy quantity while the machine is copying.
4. Press [Start].
important:
You can make copy settings and scan documents even if the machine is currently printing. The scanned documents are processed after the current job is complete. You can reserve up to 5 copy jobs, with different settings for each job.