Document Jams in the ADF

Cause	Action
The document remains in the ADF because the Stop button is pressed when the machine is scanning the document.	If you press the Stop button during scanning, "Document in ADF. Press OK to discharge document." appears on the LCD. Press the OK button so that the remaining document is automatically fed out.
Document jams in the ADF (Document Tray).	Remove the document following the procedure below.   (1) If printing is in progress, press the Stop button.   (2) Turn off the machine.   (3) If a multi-page document is loaded, remove any pages other than the jammed page from the ADF, then open the Document Feeder Cover.     (4) Raise the Paper Release Lever (A), then remove the jammed page from under the roller to the Document Feeder Cover side.     (5) Pull out the jammed document from the ADF.   If the document cannot be pulled out with ease, follow the procedure in Document jams in the ADF (inner side)..     (6) Press down the Paper Release Lever (A), close the Document Feeder Cover, then turn on the machine.   When rescanning the document after clearing the error, rescan it from the first page.   Note   The document may not feed properly depending on the media type, or your environment, such as when the temperature and humidity are either too high or too low.   In this case, reduce the number of document pages to approximately half of the loading capacity.   If the document still jams, use the Platen Glass instead.
Document jams in the ADF (inner side).	Remove the document following the procedure below.   (1) If printing is in progress, press the Stop button.   (2) Turn off the machine.   (3) If a multi-page document is loaded, remove any pages other than the jammed page from the ADF. (4) Open the Document Output Slot.     (5) Open the Document Cover.     (6) Insert your hand into the Document Output Slot, then while pushing up the part above the paper feed rollers with your fingers, pull out the document from the inner side of the Document Cover.     (7) Close the Document Cover.   (8) Close the Document Output Slot, then turn on the machine.   When rescanning the document after clearing the error, rescan it from the first page.
Document Jams in the ADF (Document Output Slot).	If the document is jammed in the Document Output Slot, open the Document Output Slot as shown in the figure below and pull out the document.     When rescanning the document after clearing the error, rescan it from the first page.