2-Sided Copying
The 2-Sided Copying mode enables you to make 2-sided copies from 1-sided documents, or make 1-sided copies from 2-sided documents. This feature is useful especially when copying in large quantities because paper costs can be reduced by half.
The default setting is <OFF>.
note:
- 2 to 2-Sided and 2 to 1-Sided copying are available only for the D480.
- Paper used to make 2-sided copies must conform to the following specifications:
- Paper size: LTR and A4 (envelopes cannot be used for 2-sided copying)
- Paper weight: 17 to 21 lb (64 to 80 g/sq.m.)
Please choose an item below:
The MF4370dn is used for illustration purposes in this section.
1. Place documents.
2. Press [COPY].
3. Press [2-Sided] to select <1 > 2-SIDED>, then press [OK].
note:
If there are odd number of documents when the 1-Sided to 2-Sided mode is used, the back side of the last copy is left blank.
4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE>, then press [OK].
- <BOOK TYPE>: The front and back sides of the copy will have the same top-bottom orientation.
- <CALENDAR TYPE>: The front and back sides of the copy will have the opposite top-bottom orientation.
note:
For the landscape oriented documents:
-
When <BOOK TYPE> is selected, the front and back sides of the copy will have the opposite top-bottom orientation.
-
When <CALENDAR TYPE> is selected, the front and back sides of the copy will have the same top-bottom orientation.
5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
6. Press [Start].
If you want to copy multiple documents using the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].
note:
-
To cancel all settings, press [Stop/Reset].
-
When you switch the mode by pressing the mode keys such as [FAX], all settings will be canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
-
You can skip step 4. In this case, the machine scans 1-sided documents to make 2-sided, <BOOK TYPE> copies.
Top
1. Place documents in the ADF.
2. Press [COPY].
3. Press [2-Sided] repeatedly to select <2 > 2-SIDED>, then press [OK].
4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE> for the document layout, then press [OK].
-
<BOOK TYPE>: The front and back sides of the document will have the same top-bottom orientation.
-
<CALENDAR TYPE>: The front and back sides of the document will have the opposite top-bottom orientation.
5. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE> for the output layout, then press [OK].
6. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
7. Press [Start].
note:
-
To cancel all settings, press [Stop/Reset].
-
When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
-
You can skip steps 4 and 5. In this case, the machine scans 2-sided documents in the <BOOK TYPE> orientation and outputs the same way.
-
If you press [Start] in step 4 after selected <CALENDAR TYPE>, the machine scans 2-sided documents in the <CALENDAR TYPE> orientation and outputs the same way.
Top
1. Place documents in the ADF.
2. Press [COPY].
3. Press [2-Sided] repeatedly to select <2 > 1-SIDED>, then press [OK].
4. Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE>, then press [OK].
5. Use - [numeric keys] to enter the desired copy quantity (1 to 99).
6. Press [Start].
note:
-
To cancel all settings, press [Stop/Reset].
-
When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings as follows: [Menu] -> <COPY SETTINGS> -> <STANDARD SETTINGS> -> <2-SIDED>
-
You can skip step 4. In this case, the machine scans 2-sided documents in the <BOOK TYPE> orientation to make 1-sided copies.
Top