Basic Methods for Sending Faxes (MF8450/MF9100 Series)
Article ID: ART129183 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Basic Methods for Sending Faxes (MF8450/MF9100 Series)

Solution

Basic Methods for Sending Faxes

1. Place your originals.

2. Press (Main Menu).

3. Use [], [] or (Scroll Wheel) to select <Send/FAX>, then press [OK].

4. Use [], [] or (Scroll Wheel) to select <Enter Fax (New)>, then press [OK].

5. Enter the fax number using - , and (numeric keys).

  • You can enter up to 120 characters for the fax number.

6. Use [], [] or (Scroll Wheel) to select <Set Destination>, then press [OK].

7. Make the scan settings you require.

You can specify the following settings:

  • <Resolution Settings>: Adjusts the resolution of originals.
  • <Density/Background Rem.Set.>: Adjusts the density and the background color of originals.
  • <Original Image Quality Settings>: Adjusts the image quality of originals.
  • <Original Image Quality Settings>: Adjusts the image quality of originals.
  • <2-Sided Orig. Orientation Set.>: Scans two-sided originals for sending.
  • <Delayed TX Settings>: Sends scanned documents at a specified time.
  • <Direct Send Settings>: Sends each page of the document to the destination as it is scanned.
  • <Register Favorites>: Stores frequently used send settings for future use.

8. Press (Start).

  • Scanning starts if the original is placed in the feeder, and the scanned data is sent to the specified destination when scanning is complete.
  • To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

9. Use [], [] or (Scroll Wheel) to select the original size, then press [OK].

10. Press (Start).

11. Follow the instructions on the display, then press (Start) once for each original.

12. When scanning is complete, press the right Any key to select <Done>.

  • Scanning starts, and the scanned data is sent to the specified destination when scanning is complete.
  • To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

SIMS Doc Id

0