Article ID: ART129364 | | | Date published: 05/12/2015 | | | Date last updated: 08/17/2015 |
Description
Solution
Ink Tank Seated Properly
Refer to the following steps to verify the ink tanks are seated correctly:
1. Make sure that the power is turned on, and open the Paper Output Tray gently.
2. Lift the Scanning Unit (Cover) until it stops.
The Print Head Holder moves to the replacement position.
![]()
|
![]()
|
![]()
|
3. Press the mark (Push) on the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up red.
If the Ink Lamp is off:
The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink tank is not installed properly, press the mark
(Push) on the ink tank until the ink tank clicks into place. If it does not click into place, make sure that the orange protective cap has been removed from the bottom of the ink tank. If the function for detecting the remaining ink level is disabled, replace the ink tank with a new one.
4. Close the Scanning Unit (Cover) gently.
|