Print Settings (DPOF Print Settings)

You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF.

Easily Add Images to the Print List

1. Select an image by dragging your finger across the screen horizontally.

- You can also select an image by pressing the or buttons or use the <Control Dial>.

2. Press the <FUNC./SET> button to select (videos will be excluded) then press the <FUNC./SET> button again.

3. To print the list of selected images press the or buttons and select the number of prints. Press the or buttons or use the <Control Dial>, select [Add] and press the <FUNC./SET> button.

- To remove an image from the print list, select the added image from the print list and press the <FUNC./SET>, select and press <FUNC./SET>. Press the or buttons or use the <Control Dial> to select [Remove], then press <FUNC./SET>.

Print Added Images

The following examples use the Canon SELPHY series printers. Your screens may vary depending on the features offered for your printer model.

1. Connect the camera to the printer using the USB cable.

2. Press the or buttons, select [Print now] and press the <FUNC./SET> button.

- Printing will start.

- If you stop the printer during printing and start again, it will start from the next print.

The mark appears over images that have had print marks set by another DPOF-compliant camera. These settings will be overwritten by any print marks set by your camera. The output of some digital printers or photo lab services may not reflect the specified print settings. Print settings cannot be set for movie images.

Selecting Images for Printing

Options for Image Selection.

Select images and Quantity	Configures print settings for single images as you view them.
Select Range	For picking a first and last image and printing all the images in the range.
Select All Images	Configures print settings for all images.

Only one copy will be printed for each selected image. With the [Select Images and Qty.] option, you can only set the number of copies to print with the [Print Type] option is set to single print [Standard], [Index] or .

Procedure for Selecting Images.

1. Slide the mode switch to (playback) and and select the (Print) Menu Select a Menu item and press the <FUNC/SET> button.

2. Select the Image, date, category or folder you wish to print and press the <FUNC./SET> button.

[Select Images and Qty.]

Use the or button to select an image, press the <FUNC./SET> button and then use the or button to select the number of print copies ( you can select up to 99 copies).

- Press the Menu button to complete the setting.

Select Range

- Select the first image.

• You can circle your finger on the Touch Control Dial to select the first and last image.

1. Press the <FUNC.SET> button.

2. Use the or button to select the first image in the print range.

3. Press the <FUNC./SET> button.

- Select the last image.

1. Use the button to select [Last Image].

2. Press the <FUNC./SET> button.

3. Use the or button to select the last image in the range.

4. Press the <FUNC./SET> button.

Select All Images

- Configure the print settings.

1. Use the or button to select [OK].

2. Press the <FUNC./SET> button.

• The screen will return to the selection method screen.
• Selecting [Cancel] cancels the operation.

- Clear All Selections

1. Use the or button to select [OK].

2. Press the <FUNC./SET> button.

• The screen will return to the selection method screen.
• Selecting [Cancel] cancels the operation.

Images are printed in order from oldest to newest by the shooting date. A maximum of 998 images can be marked per SD card. If you are connected to a printer, the ( Print Share) button will light blue while you are selecting images. You can start printing at this point by pressing the (Print Share) button confirming that [Print] is selected and pressing the <FUNC./SET> button. When [Print Type] is set to , the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). Print settings can also be assigned to images with the supplied software programs on a computer.

Setting the Print Style

The following print settings can be selected.

-	Standard	Prints one image per page
Print Type	Index	Prints index prints (multiple reduced-size images per page)
-		Prints the images in the standard and index formats
Date	On/Off	Adds the date to the print
File No.	On/Off	Adds the file number to the print
Clear DPOF	On/Off	Clears all print settings after the images print.

1. In the [ (Replay)] menu, select [(Print)], use the to choose [Print Settings] and press the <FUNC./SET> button.

2. Select [Print Type], [Date] or [File No.] or [Clear DPOF data] and then specify the desired settings. Select a setting using the or button.

5. Press the <MENU> button.

The set up menu will close and the Print Order menu will reappear.

The Date and File No. settings change according to the Print Type as follows. - Index [Date] and [File No.] cannot be set to [On] at the same time. - Standard or [Date] and [File No.] can be set to [On] at the same time, however, the printable information may vary between printers. The date prints as the date and time in the format specified in the Set Date/Time menu. Images with date imprints created by (Postcard Date Imprint Mode) (p. 35) will have the date imprinted regardless of the [Date] setting. Accordingly, the date may be printed twice if [Date] is set to [On]. Dates print in the style specified in the [Date/Time] menu.