Setting ISO speed with the PowerShot SX200 IS.

Article ID: ART129646 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.

  • As the actual locations of buttons / switches on cameras vary depending on the camera model, the illustrations that appear on this page may differ from your camera.
  • Screens or menu listings may differ depending on the camera model being used.
  • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().
  • Explanations are provided by using an example where the [ISO Speed] settings have never been changed.
  • To set the [ISO Speed], it is necessary to set the [Shooting Mode] to one of the following modes.

- [Program AE] (), [Shutter Speed Priority] (), [Aperture Priority] (), [Manual] ()

1. Press the <Power> button on the camera.

2. Press the <FUNC./SET> () botton.

3. The following screen appears on the LCD monitor.

Operate the <Directional buttons> up and down to select [Auto] ().

Press the <FUNC./SET> () button or the right <directional button> to display the [ISO Speed] list.

4. Select an [ISO Speed].

Operate the <directional buttons> up and down to select an [ISO Speed]* of your choice.

After the selection is made, press the <FUNC./SET> () button.

* The appropriate [ISO Speed] differs depending on shooting locations. If the camera shake warning icon () appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 80], [ISO 100], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.

5. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).


  • Raising the [ISO Speed] results in a faster shutter speed. Therefore, you can shoot images with less subject blur and camera shake.
  • However, the higher the [ISO Speed], the more the noise stands out (more uneven areas in an image).
  • With [ISO 3200], you can set an even faster speed.

How to set [ISO 3200] : Set the [Shooting Mode] to [SCN] (), and then press the <FUNC./SET> () button. Next, press the <FUNC./SET> () button or the right <Directional buttons>, and then operate the <Directional buttons> up or down to select [ISO 3200] ().

  • When the camera is set to [ISO 3200], Recording pixels are set to () (1600 x 1200 pixels).
  • When the camera is set to [ISO 3200], noise may stand out.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments