The default operation when the camcorder is connected to the DW-100 DVD burner or a Computer/Pictbridge printer is to display the device connection screen
*.
When the camcorder is connected the display will read.
[SELECT THE DEVICE TYPE FOR THE USB CONNECTION]
[DVD BURNER PC/PRINTER]
Using the joystick select the desired operation and press the <SET> button.
- The camcorder will enter the desired communication mode.
From the [SYSTEM SETUP] menu the default operation may be changed so that the camcorder always performs the same operation if desired. Perform the steps listed below to change the default USB connection operation.
- Turn the camera on in either Camera or Movie playback mode.
- Press the <FUNC.> button.
- Using the joystick select the [MENU] icon and press <SET>.
- Using the joystick select the [SYSTEM SETUP] menu and press <SET>.
- Using the joystick select the [USB SETTING] menu and press <SET>.
- Select the desired operation (DVD BURNER or PC/PRINTER or CONNECT & SET (default)) and press <SET>.
- Press the <FUNC.> button to close the menu.
*HG10 models with DW-100 compatibility firmware update only.