Using the Self-Timer
When using the [Self-Timer], you can set a 10-second or 2-second delay for shooting after the shutter button is pressed. Also, you can set a custom delay time and the number of shots to shoot after the shutter button is pressed. This section describes how to set and cancel the [Self-Timer].
Setting Self-Timer to 10 seconds or 2 seconds
1. Press the <Power> button on the camera.
2. Press the <Self-Timer> button (
).
3. The following screen appears.
Operate the <directional buttons> to select [10 sec. Self-Timer] (
) or [2 sec. Self-Timer] (
).
Confirm that the [Self-Timer] setting you selected appears.
4. If the following icon appears on the LCD monitor, this setting is completed.
Canceling the Self-Timer
5. Press the <Self-Timer> () button, and the following screen appears.
Operate the <directional buttons> to select the [Self-Timer Off] (
).
Make sure to select [Self-Timer Off].
6. If the self-timer icon is not displayed, then the [Self-Timer] setting has been cancelled.
This completes the process of setting the self-timer.
