These instructions explain how to insert the date in images.
attention:
- The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image.
- When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].
- When the shooting mode is set to <Movie> (), settings for inserting the date and time cannot be made.
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to <Program AE> ().
1. Press the <Power> button on the camera.
2. Press the <FUNC./SET> () button.
3. A screen like the one below will appear on the monitor.
Select [Date Stamp] () in the [Recording Pixels] section .
Press the <MENU> () button.
4. A screen like the one below will appear on the monitor.
Operate the <directional buttons> left or right to select [Date Stamp] and set it to [Date] or [Date & Time].
Press the <MENU> () button.
5. Press the <FUNC./SET> () button.
6. Make sure that the [Date Stamp] is set and the following screen will appear with the icon () in the lower-left corner of the screen.
7. When shooting with this setting, the date will be embedded in the image as shown below.
[Date]
[Date & Time]
warning:
The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.