The camcorder can be powered by a battery pack or be connected to a household power outlet. Charge the battery pack before use.
Attaching and Charging the Battery Pack
- Turn off the camcorder.
- Attach the battery pack to the camcorder.
- Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place.
- Connect the power cord to the adapter.
- Plug the power cord into a power outlet.
- Charging will start when the camcorder is turned off.
If the camcorder was on, the green ON/OFF (CHG) indicator will go out when you turn off the camcorder. After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging). The red ON/OFF (CHG) indicator will go out when the battery pack is fully charged.
|
|
|
|
Once the battery is fully charged:
- Disconnect the power adapter from the camcorder.
- Unplug the power cord from the power outlet and the adapter.
To remove the battery pack:
Slide the <Battery Release> in the direction of the arrow and hold it pressed down. Slide the battery pack down and then pull it out.
