Changing the Print Settings

This machine prints received faxes to paper loaded in the machine beforehand. You can use the Operation Panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper

Important

• If paper other than A4, Letter-, or Legal-sized paper is loaded, the received faxes are stored in memory and Check the page size and press OK. is displayed on the LCD. In this case, replace the loaded paper with A4, Letter-, or Legal-sized paper, then press the OK button.
  
  You can also press the Stop button to close the message and print the stored documents in memory later.
  
  
• If no paper is loaded or paper has run out while printing is in progress, the received faxes are stored in memory and There is no paper. Load paper and press OK. is displayed on the LCD. In this case, load in the Rear Tray and press the OK button.
  
  You can also press the Stop button to close the message and print the stored documents in memory later.

Note

If the sender sends a document that is larger than Letter-size or Legal-size, such as 11" x17", the sender's machine may send the fax automatically reduced in size or divided, or send only a part of the original.

Setting Items

Press the Settings button in the fax mode. Use the button to select the setting item. Use the button to change the setting.

1. Page size

Select the page size from A4, 8.5"x11"(LTR), or 8.5"x14"(Legal).

2. Media Type

The paper type is set to Plain paper.

If you press the Settings button, the LCD returns to the FAX standby screen.