Adjusting the <Retry Times>

Retry Times is the mode which automatically resends data when the data cannot be sent. This occurs because the receiver is busy sending or receiving, or when an error occurs. This setting determines the number of retry attempts. You can set from one to five retry attempts, or select <0> to turn the Retry Times mode off.

The default setting is <3>.

1. Press (Main Menu).

2. Press the right Any key to select <Additional Func.>.

3. Use [], [] or (Scroll Wheel) to select <Communications Settings>, then press [OK].

4. Use [], [] or (Scroll Wheel) to select <Common Settings>, then press [OK].

5. Use [], [] or (Scroll Wheel) to select <TX Settings>, then press [OK].

6. Use [], [] or (Scroll Wheel) to select <Retry Times>, then press [OK].

7. Use [], [] or (Scroll Wheel) to set the number of retry attempts, then press [OK].

• You can also use - (numeric keys) to set the number of retry attempts.
• If the number of retry times is set to <0>, the machine will not resend the data.

8. Press (Main Menu) to return to the Main Menu screen.