You can set the flash output from 1/64 power to 1/1 full power in full-stop increments
Use a hand-held flash meter to determine the required flash output to obtain a correct flash exposure. Be sure to first set the camera's shooting mode to Av or M
 |
Press the <MODE> button so that <M> is displayed
Set the flash output
- Press the
 button
- then flash output display will blink
- press the
 button to set the flash output, then press the button
- Press the shutter button halfway down to see the effective flash range
|
Flash Output Display
The manual flash output value will change as shown below when the flash output is decreased or increased.
