Ask a Question

When the Paper Is Smudged/Printed Surface Is Scratched - MP250 / MP270

Article ID: ART131362 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

When the Paper Is Smudged/Printed Surface Is Scratched - MP250

Solution

Paper Is Smudged/Printed Surface Is Scratched
Issue



Cause

Check 1: Did you confirm the paper and print quality settings?
Summary


Cause

Check 2: Is the appropriate type of paper used? Check the followings:
Summary

  • Check to see if the paper you are printing on is suitable for your printing purpose.
  • When performing Borderless Printing, make sure that the paper you are using is suitable for Borderless Printing.If the paper you are using is not suitable for Borderless Printing, the print quality may be reduced at the top and bottom edges of the paper.
Cause

Check 3: Load the paper after correcting its curl.
Summary

  • For Plain Paper
Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the Rear Tray for a long time may cause the paper to curl. In this case, load the paper with the other side facing up. It may resolve the problem.

We recommend putting unused paper back into the package and keeping it on a level surface.


  • For Other Paper
If the curl on the four corners of the paper is more than 0.1 inch / 3 mm (A) in height, the paper may be smudged or may not be fed properly. In such cases, follow the procedure described below to correct the paper curl.


1. Roll up the paper in the opposite direction to the paper curl as shown below.


2. Check that the paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
NOTE
Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward. In such cases, follow the procedure described below to curl the paper outward within 0.1 inch / 3 mm (B) in height before printing. This may improve the print result.

(C) Printing side
We recommend printing paper that has been curled outward one sheet at a time.
Cause

Check 4: If you are printing on thick paper, select the Prevent paper abrasion setting.
Summary

Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head and the loaded paper. If you notice abrasion even with the media type set correctly to match the loaded paper, set the machine to prevent paper abrasion by using the Operation Panel or the printer driver.
Print speed is reduced if you are selecting the Prevent paper abrasion setting.
* Deactivate the Prevent paper abrasion setting once printing is complete. If not, this setting remains enabled for all subsequent print jobs.
  • To set by using the Operation Panel
Press the Maintenance button repeatedly until r appears on the LED, then press the Black button to enable the Prevent paper abrasion function.
To disable the Prevent paper abrasion function, press the Maintenance button repeatedly until r appears on the LED, then press the Color button.

  • To set by using the printer driver
Open the printer properties dialog box, and in Custom Settings in the Maintenance sheet, select the Prevent paper abrasion check box, and then click Send.

In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper abrasion check box, and then click Send.
Cause

Check 5: If the intensity is set high, reduce the Intensity setting in the printer driver and try printing again.
Summary

If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become wavy, causing paper abrasion.
Reduce the Intensity setting in the printer driver and try printing again.



1. Open the printer properties dialog box.

2. On the Main sheet, select Manual for Color/Intensity, and then click Set.

3. Drag the Intensity slide bar on the Color Adjustment sheet to adjust the intensity.



1. Open the Print dialog box.

2. Select Color Options in the pop-up menu.

3. Drag the Intensity slide bar to set the intensity.
Cause

Check 6: Is printing performed beyond the recommended printing area?
Summary

If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper may become stained with ink.
Resize your original document in your application software.

Cause

Check 7: Is the Platen Glass dirty?
Summary

Clean the Platen Glass.

Cause

Check 8: Is inside of the machine dirty?
Summary

When performing duplex printing, the inside of the machine may become stained with ink, causing the printout to become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the machine.
NOTE
To prevent the inside of the machine from stains, set the paper size correctly.


Cause

Check 9: Set Ink Drying Wait Time longer
Summary

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.



1. Make sure that the machine is turned on.

2. Open the printer properties dialog box.

3. Click the Maintenance tab and then Custom Settings.

4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.

5. Confirm the message and click OK.



1. Make sure that the machine is turned on.

2. Open the Canon IJ Printer Utility.

3. Select Custom Settings in the pop-up menu.

4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.

5. Confirm the message and click OK.
Cause

Check 10: Is the paper scratched by other loaded paper?
Summary

Depending on the media type, the paper may be scratched by other loaded paper when feeding from the Rear Tray. In this case, load one sheet at a time.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments