Ask a Question

When Printing Does Not Start - MP560

Article ID: ART131370 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

When Printing Does Not Start - MP560

Solution

Printing Does Not Start
Check

Check 1: Make sure that the power plug is securely plugged in, then turn the machine on.

Summary

While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green.
NOTE
  • When printing large data such as a photo or graphics, it may take longer to start printing. While the Power lamp is flashing green, the computer is processing data and sending it to the machine. Wait until printing starts.
Check

Check 2: When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the following:

Summary

  • If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details.
  • There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check

Check 3: Restart your computer if you are printing from the computer.

Summary

If there are any unnecessary print jobs, delete them.
Check

Check 4: Make sure that your machine's name is selected in the Print dialog box.

Summary

The machine will not print properly if you are using a driver for a different printer.
In Windows, make sure that your machine's name is selected in the Print dialog box.
In Macintosh, make sure that your machine's name is selected in Printer in the Print dialog box.
NOTE
To make the machine the one selected by default, select Set as Default Printer (Windows), Default Printer or Make Default (Macintosh).
Check

Check 5: Configure the printer port appropriately. ( Windows )

Summary

Configure "USBnnn" (where "n" is a number) as the printer port.
1. Log on as a user account with administrator privilege.
2. Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes.
In Windows 2000, click Control Panel then Printers.
3. Right-click the Canon XXX Printer icon, then select Properties.
4. Click the Ports tab to confirm the port settings.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer appearing in the Printer column is selected for Print to the following port(s).

If the setting is incorrect, reinstall the MP Drivers or change the printer port to the correct one.

Note

When the machine is used over LAN, the port name of the machine is displayed as "CNBJNP_xxxxxxxxxx".
* "xxxxxxxxxx" is the character string generated from the MAC address or a character string specified by the user when setting up the machine
Check Check 6: Check the status of ink tanks. Replace the ink tank if ink has run out
Check Check 7: Open the Scanning Unit (Cover) and check to see if the ink lamps are flashing red.

Summary

 If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a right position.
Check Check 8: Open the Scanning Unit (Cover) and make sure that the ink lamps light up red.

Summary

 If the ink lamp is not lit, press the mark on the ink tank until it clicks into place.
Check

Check 9: Is the size of the print data extremely large?

Summary

Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in the displayed dialog.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments