Ask a Question

Printing network setting information - iX7000

Article ID: ART131454 | Date published: 05/12/2015 | Date last updated: 03/21/2019
 

Description

This article provides instructions for printing a network configuration page.  An example of this page is attached to this article.

Solution

Note: The steps listed below are specific to the iX7000.  For instructions for other models, click here

Printing Network Setting Information

To print the current network settings of the printer, hold down the <RESUME/CANCEL> button (A) until the POWER lamp (B) flashes 6 times, then release it.

The following information is printed.

" Printer name " Printer access control
" Firmware version " Admin password
" Wired LAN information " Device status

Important:

This printout contains valuable information about your computer. Handle it with care.

SIMS Doc Id

0

Attachment

iX7000_NW_Settings.pdf
47K • < 1 minute @ 56k, < 1 minute @ broadband



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments