Power Saving Function
This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power.
| Auto Power Down |
When set to [On], the power will shut off in the following circumstances. Press the power button again to restore power.
Shooting Mode: Approximately 3 minutes after the last control is accessed on the camera.
Playback mode or when connected to a printer: Approximately 5 minutes after the last control is accessed on the camera.
|
| Display Off |
In the shooting mode, the LCD monitor or viewfinder automatically turns off after the selected time if no control is accessed, regardless of the [Auto Power Down] setting. Press any button other than the power button or change the camera orientation to turn the LCD monitor (or the viewfinder) back on. |
1. Select [Power Saving] from the 
(Setup) menu.
2. Change settings.
- The power saving function will not activate during a slide show or while the camera is connected to a computer.
- If you set the power saving function to [Off] be careful not to forget to turn off the camera after use.
|