Facsimile (Fax) specifications MX340

Article ID: ART132334 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Facsimile (Fax) specifications for the Office All-In-One printer.

Solution

Facsimile Specifications
Applicable Line Public Switched Telephone Network (PSTN)
Compatibility
Super G3 / Color Communication) 3
Data Compression System B&W:
Color:
MH, MR, MMR
JPEG
Transmission Speed (up to) Black
Color:
Approx. 3 sec. / page 4
Approx. 1 min. / page 4
Transmission / Reception Memory Approx. 50 pages 5
Fax Resolution B&W Standard:

B&W Fine:

B&W Extra Fine:

Color:
8 pels per mm x 3.85 lines per mm, 203 pels per inch x 98 lines per inch
8 pels per mm x 7.70 lines per mm; 203 pels per inch x 196 lines per inch
300 x 200 dpi

200 x 200 dpi
ADF Capacity Letter: 30 pages (20 lb / 75 gsm paper), up to 0.16 inches / 4 mm in height
Legal: 5 pages (20 lb / 75 gsm paper), up to 0.08 inches / 2 mm in height
Speed Dial Character Limit Coded: 40
Automatic Dialing One-touch: N/A
Coded Speed: 20 destinations
Group Dialing: 19 locations
Other Features Automatic fax / telephone switchover
DRPD (Distinctive Ring Pattern Detection)
Caller / Fax reception rejection
Fax number re-entry
Check RX fax info
Remote reception by telephone (Default ID: 25)
User-friendly RX
ECM deactivation
Activity report (after every 20 transactions)
Non-delivery report
Receive Options TEL priority mode: If you receive mainly voice calls / messages and sometimes faxes. Connect a telephone or answering machine to the fax.

Available advanced settings for the TEL priority mode:
  • User-friendly RX: Sets the machine to receive a fax automatically when you pick up the handset or when the answering machine answers a call that is a fax. If the machine unexpectedly switches to fax reception during telephone calls, set this to OFF.
  • Manual/auto switch: Sets the machine to receive a fax automatically without the handset being picked up. RX start time allows you to set the number of seconds until the machine switches to fax reception. After the machine switches to fax reception, you cannot talk on the telephone even if you pick up the handset.
DRPD: When you subscribe to a ring pattern detection service provided by your telephone company. (Not available in all regions.)
Fax only mode: If you have a dedicated line for faxes.
PC Fax Fax modem (Windows only)
1 destination, monochrome transmission only



3 The Public Switched Telephone Network currently supports fax modem speeds of 22.8 Kbps or lower, depending on telephone line conditions. Sending and receiving fax machines need to conform to ITU-Tv.34 guidelines.

4 Black & white document fax transmission speed is based on default setting using ITU-T No.1 chart. Color document fax transmission speed is based on default setting using Canon Color Fax Test Sheet. Actual transmission speed may vary depending on document complexity, fax settings at receiving end, and line conditions etc.

5 Page count is based on ITU-T No.1 chart or Canon FAX Standard Chart No.1.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments