Storing a Preset Camera Position for the VC-C4 / VC-C4R with the Wireless Controller

Article ID: ART132563 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Storing a Preset Camera Position

This section describes how to store a camera head angle, zoom position and brightness level. Up to nine (1 to 9) preset positions can be stored. Switching the power off or the camera off does not erase the stored preset positions.


  • During preset operations, the camera pans and tilts at the speeds set for pan/tilt operation in the setting menu. When the "AUTO" setting is selected, the head moves at the maximum speed
  • Stored preset position information can only be overwritten. Stored preset positions cannot be erased. However, the preset position is cleared if the COMMAND mode is changed.
  • If the camera is in manual focus mode, the focus may be incorrect when a preset position is restored. In this event, set the camera to auto-focus mode or focus the camera manually.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments