1. Make sure that the power is turned on, and press the HOME button.

2. Press the left Function button (below Remaining ink vol on the display).

Check if any symbol (A) appears on the remaining ink volume screen*.

* Display varies by model

Sufficient ink is left for printing if no symbol appears.

The ink with (Ink low) is running low. You can continue printing for a while, but we recommend you to have a new ink tank available.

1. Make sure that the power is turned on, and open the Paper Output Tray gently.

2. Lift the Scanning Unit (Cover) until it stops.

The Print Head Holder moves to the replacement position.

3. Check the ink lamps.

Close the Scanning Unit (Cover) after confirming the ink lamp status.

Ink lamp is on

The ink tank is correctly installed and there is sufficient ink left for printing.

• Flashing slowly (at around 3-second intervals)
  
  

...Repeats

Ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.

• Flashing fast (at around 1-second intervals)
  
  

...Repeats

The ink tank is installed in the wrong position or it is empty. Make sure that the ink tank is installed in the correct position as indicated by the label on the Print Head Holder. If the position is correct but the lamp flashes, the ink tank is empty. Replace it with a new one.

The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink tank is not installed properly, press the mark (Push) on the ink tank until the ink tank clicks into place. If it does not click into place, make sure that the orange protective cap has been removed from the bottom of the ink tank. If the function for detecting the remaining ink level is disabled, replace the ink tank with a new one.

If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine cannot print. Check the error message displayed on the LCD.