Specifications for PowerShot SD940 IS.

Article ID: ART132640 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Specifications for PowerShot SD940 IS.

Solution

PowerShot SD940 IS Specifications

All data is based on Canon's standard testing methods. Subject to change without notice.

SD Memory Card

Battery NB-4L

Battery Charger

PowerShot SD940 IS
Camera effective pixels Approx. 12.1 million
Image Sensor 1/2.3 -inch CCD (Total number of pixels: approx. 12.4 million)
Lens 5.0 (W) - 20.0 (T) mm (35 mm film equivalent: 28 - 112 mm), F 3.2 (W) - 5.7 (T)
Digital Zoom Maximum approx. 4.0X (Maximum approx. 16x with optical zoom)
LCD Monitor 2.7-inch, low-temperature polycrystalline silicon TFT color LCD, approx. 230,000 pixels (Picture coverage 100%)
AF System TTL Autofocus, Focus lock available

AiAF: Face Detect / 9-point AiAF / 1-point AF (Fixed to center)

Focusing Range

Normal: 1.0 ft./30cm-infinity (W), 1.6 ft./50 cm-infinity (T)

Macro: 1.2 in.-1.6 ft./3-50cm (W)

Digital Macro: 1.2-3.9 in./3-10cm (W)

Shutter Mechanical + electronic
Shutter Speeds 15 - 1/1500 sec.
The shutter speed varies according to the shooting mode.
Slow shutter speeds of 1.3 sec. or slower operate with noise reduction.
Image Stabilization Lens shift type Continuous/Shoot Only/Panning/Off
Light Metering Method Evaluative*1, Center-weighted average or Spot*2

*1 When AiAF is set to [Face Detect], the brightnessof the face is also evaluated

*2 Fixed to center

Exposure Control Program AE, i-Contrast, AE Lock
Exposure Compensation +/- 2 stops in 1/3-stop increments
Sensitivity AUTO*1/ High ISO Auto*2, selectable ISO 50/100/200/400/800/1600 equivalents.

*1 Camera automatically sets the optimal speed.

*2 Standard Output Sensitivity, Recommended Exposure Index.

White Balance TTL Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H) or custom
Flash

Auto, Red-eye Reduction, Auto Red-eye Correction, Flash On, Flash Off; FE lock, Slow Synchro

Flash Range

1-13 ft./30cm-4.0m (W), 1.6-6.6 ft./50cm-2.0m (T) (when sensitivity is set to ISO Auto)

Shooting Modes

Auto, Program, Portrait, Foliage, Snow, Beach, Sunset, Fireworks, Aquarium, Underwater, ISO 3200, Indoor, Kids & Pets, Night Snapshot, Color Accent, Color Swap, Digital Macro, Long Shutter, Stitch Assist, Movie

Continuous Shooting Approx. 0.8 images / sec.
Self-Timer Activates shutter after an approx. 10-sec./approx. 2-sec. delay, Custom Timer
Recording Media SD memory card/MultiMedia Card / SDHC memory card / MultimediaCard / MMCplus card/ HC MMCplus card
File Format Design rule for Camera File System, DPOF compliant
Image Recording Format Still Images: JPEG (Exif 2.2)*1

Movies: MOV (Image data : H.264, Audio data:Linear PCM [monaural])

Compression Fine/normal
Number of Recording Pixels Still images :

Large: 4000 x 3000 pixels

Medium 1: 3264 x 2448 pixels

Medium 2: 2592 x 1944 pixels

Medium 3: 1600 x 1200 pixels

Small: 640 x 480 pixels

Widescreen: 4000 x 2248 pixels

Movies:

Standard, Color Accent, Color Swap:

1280 x 720 pixels (30 frmaes/sec.)

640 x 480 pixels (30 frames/sec.)

320 x 240 pixels (30 frames/sec.)

Recording can continue until the memory card is full* (can record up to a maximum of 4 GB* at one time).

* Even if the clip size has not reached 4 GB, recording will stop at the moment the clip length reaches 1 hour. Depending on the volume and data writing speed of the memory card, recording may stop before reaching 1 hour or before the recorded data volume has reached 4 GB.

Number of Possible Shots

Approx. 220 images (Based on CIPA standardized measurement)

Playback Modes

Still Image: Single, Magnification (approx. 2x-10x), Auto Rotate, Rotate, Resume, My Colors, My Category, By Date, By Folder, By File Type, Transition Effects, Histogram, Overexposure Warning, Index (4-130 thumbnails), Slide Show, Red-eye Correction, Trimming, Resize, Image Inspection Tool, i-Contrast

Editing Function Erase, Protect, My Category, Resize, My Colors, i-Contrast, Trimming, Rotate, Red-Eye correction,
Direct Print Canon Direct Print and Bubble Jet Direct compatible, and PictBridge compliant
Display languages 21 languages available for menus and messages (English, German, French, Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Simplified Chinese, Russian, Portuguese, Greek, Polish, Czech, Hungarian, Turkish, Traditional Chinese, Korean and Japanese)
Interface Universal Serial Bus (USB) 2.0 High-Speed (mini-B) Audio/Video Output (NTSC or PAL selectable, monaural audio)
Communication Settings MTP,PTP
Power Source Rechargeable Lithium-ion battery (type: NB-4L)

AC Adapter Kit ACK-DC10 (optional)

Operating Temperatures 0o - 40o C (32o - 104o F)
Operating Humidity 10 - 90 %
Dimensions (w x h x d) 3.52 x 2.16 x 0.79/89.5 x 54.9 x 20.0 mm
Weight

(camera body only)

Approx. 120 g (4.23 oz.)

*1 This digital camera supports Exif 2.2 (also called "Exif Print"). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera's image data at the time of shooting is used and optimized, yielding extremely high quality prints.

SD Memory Card

Interface Compatible with SD memory card standards
Dimensions 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.)
Weight Approx. 2 g (0.1 oz.)

Battery Pack NB-4L

Type Rechargeable Lithium Ion Cell
Nominal Voltage 3.7 V
Typical Capacity 760 mAh
Cycle Life Approx. 300 times
Operating Temperatures 0- 40 oC (32 - 104 oF)
Dimensions 35.4 x 40.3 x 5.9 mm (1.39 x 1.59 x 0.23 in.)
Weight Approx. 17 g (0.88 oz.)

Battery Charger CB-2LV/CB-2LXV

Rated Input

100 - 240 V AC (50/60 Hz)

0.1 A (100 V) - 0.06 A (240 V)

Rated Output 4.2 V DC / 0.65 A
Charging Time Approx. 1 hour 30 minutes
Operating Temperatures 0o- 40oC (32o - 104oF)
Dimensions 53.0 x 86.0 x 19.5 mm (2.09 x 3.39 x 0.77 in.)
Weight

Approx. 60 g (2.12 oz.) (CB-2LV)

Approx. 55 g (1.94 oz.) (CB-2LVE) (excluding power cord)

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments