Ask a Question

How to Set VC-C1 Mode and VC-C3 Mode Setting Menu on the VC-C4 / VC-C4R via the Wireless Remote Control

Article ID: ART132662 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Solution

VC-C1 Mode and VC-C3 Mode Setting Menu

Use this procedure to set the COMMAND setting for using the VC-C4/VC-C4R in Canon Communication Camera VC-C1 mode or VC-C3 mode (© P.28). When you set COMMAND to VC-C1 mode or VC-C3 mode, some of the setting menus and specifications change, as shown below.

NOTE

  • REMOTE CONTROLLER ID in the SET MENU and AE REFERENCE in the AE SETTING are only enabled in VC-C3 mode and do not appear in the VC-C1 mode.
  • If you press the button after changing the mode, the screen momentarily goes blank. This is not a fault. Also, when you change modes, all the stored preset positions are cleared and the range of camera head movement reverts to the default values in each mode.
  • The range of pan/tilt/zoom movement in VC-C1 mode corresponds to that available on the VC-C1 itself.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments