Adding Marks while Recording
Article ID: ART133273 | Date published: 05/12/2015 | Date last updated: 10/22/2015
 

Description

Adding Marks while Recording

Solution

 

When recording, you can flag an important shot in a clip by adding a “shot mark” (S). There are two types of shot marks, shot mark 1 (S1) and shot mark 2 (S2), and you can add either or types to a single clip. You can also add an OK mark (OK) or check mark () to the entire clip to flag clips you want to set apart. You can add all four types of marks remotely using the Wi-Fi Remote application.

When the camcorder is in mode, you can add or delete shot marks. You can also display an index screen of all the shot marks, allowing you to find a particular scene in a clip more quickly.

 

Adding Shot Marks while Recording

To add a shot mark to a clip while recording, you must first set in advance an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2].

1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]

  • To add shot marks, set one assignable button to [Add Shot Mark 1] and another assignable button to [Add Shot Mark 2].

2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.

  • A message indicating the short mark will appear and the selected shot mark will be added to the current frame of the clip.
  • You can press the button again to add another shot mark. Up to 100 shot marks (S1 and S2 marks combined) can be added to a single clip.

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations you can set a shot mark (S1 or S2) remotely from a Wi-Fienabled device using the Wi-Fi Remote application.

1 While recording a clip, press [SHOT MARK1] on the Wi-Fi Remote screen to set a shot mark 1 or

[SHOT MARK2] to set a shot mark 2.

  • [Shot Mark1] or [Shot Mark2] will be displayed on the Wi-Fi Remote screen and the shot mark will be applied to the clip.

2 Press to close the message

 

NOTES

  • There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot mark. When using the Wi-Fi Remote application, the delay may be longer depending on the conditions of the wireless signal.
  • When you are using interval recording or frame recording mode, you cannot add shot marks to a clip.
  • When a clip contains either shot mark, S will appear next to the clip’s thumbnail in the playback index screen

Adding an   Mark or % Mark to the Last Clip Recorded

After recording an important clip, you can add an OK mark () or check mark () to the clip to flag it and set it apart. When the camcorder is in mode, you can display an index screen that contains only clips with an   mark or only clips with a % mark. Furthermore, you can use the mark to protect important clips, as clips with an   mark cannot be deleted.

To add an   mark or % mark to the last clip recorded in mode, you must first set in advance an assignable button to [Add   Mark] or [Add   Mark].

1 Set an assignable button to [Add   Mark] or [Add   Mark]

To add types of clip marks (to different clips), set one assignable button to [Add   Mark] and another assignable button to [Add   Mark].

2 After recording a clip, press the assignable button.

  • A message indicating the clip mark will appear and the selected clip mark will be added to the clip.

 

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations you can set an $ mark or a % mark remotely from a Wi-Fi-enabled device using the Wi-Fi Remote application.

1 After recording a clip, press [ MARK] on the Wi-Fi Remote screen to set a an $mark or

[ MARK] to set a mark.

  • [OK Mark] or [Check Mark] will be displayed on the Wi-Fi Remote screen and the mark will be applied to the clip.

2 Press to close the message.

 

NOTES

  • A clip cannot have an OK mark and a % mark at the same time.