Inserting and Removing an SD Card

Article ID: ART133307 | Date published: 05/12/2015 | Date last updated: 10/22/2015


Inserting and Removing an SD Card



1 Turn off the camcorder.

2 Open the SD card slot cover.


3 Insert the SD card all the way into the SD card slot until it clicks.

  • The SD card slot is positioned at angle. Align the SD card straight in relation to the SD card slot, with the label facing the lens.

4 Close the SD card slot cover.

  • Do not force the cover closed if the SD card is not correctly inserted.


  • Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in permanent data loss.
    • Do not disconnect the power source or turn off the camcorder.
    • Do not remove the SD card.
    • Turn off the camcorder before inserting or removing an SD card. Inserting or removing the SD card with the camcorder on may result in permanent data loss.
    • SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in step 3.


  • To remove the SD card: Push the SD card once to release it. When the SD card springs out, pull it all the way out.
  • If you set the [Other Functions] > [Media Access LED] function to [Off], the access indicators will not illuminate.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments