Calibrating the Scanner - 9900F, 8400F, 8000F, 5000F, 4200F, 3200F, 3000F, 3000ex

Article ID: ART133384 | Date published: 05/13/2015 | Date last updated: 08/15/2015


Scanner Calibration


Calibrating the Scanner

Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the 'Calibration' button starts the calibration process, which will allow scanned images to be adjusted to the proper coloration.

To calibrate the scanner:

  1. Open ScanGear from the desired application (ex.- Toolbox, PhotoStudio, etc.).
  2. If not already in Advanced Mode, click on the 'Advanced Mode' button at the bottom.
  3. The calibration option is located in the Quality section.

  4. Click the Calibration..

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments