Dividing Scenes

Article ID: ART133552 | Date published: 05/13/2015 | Date last updated: 08/15/2015


Dividing Scenes


You can divide scenes in order to leave out the best parts and later cut out the rest.

1. Play back the scene you want to divide.
1-1. Touch a scene or story.
Playback will start.

1-2. Touch the screen to display the playback controls, and then press [

2. Open the scene division screen.
2-1. Touch [Edit].

2-2. Touch [Divide].

3. Bring the scene to a precise point, if necessary.
3-1. Playback controls will appear on the screen. Use any special playback modes (fast/slow playback, frame reverse/advance) as necessary to locate the desired image.

 During playback pause

Frame reverse/advance*

 During playback

Fast playback backward/forward
*When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.

3-2. Stop playback momentarily at the position you want to divide.

4. Touch [Divide].

5. Touch [Yes].

The video from the division point to the end of the scene will appear as a new scene in the index screen.

  • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
  • During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.
  • The following scenes cannot be divided:
- Video snapshot scenes and other scenes that are too short (less than 3 seconds).
- Scenes that were edited using the supplied software VideoBrowser* and were then transferred back to the camcorder.
* Depending on the model of your camcorder, this software might not come with it.
  • Scenes cannot be divided within 1 second from the beginning or the end of the scene.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments