How do I change the metering mode? (EOS 5D Mark III)
Article ID: ART133790 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 05/13/2019 |
Description
How do I change the metering mode? (EOS 5D Mark III)
Solution
How do I change the metering mode? (EOS 5D Mark III)
ID : 8201362900 _ EN _ 1
|
Solution |
The metering mode is the method of measuring the brightness of the subject.
The metering mode is set automatically to evaluative metering in the < > mode.
Type |
Description |
|
Evaluative metering |
|
This is a general-purpose metering mode suited even for backlit subjects. The camera sets the exposure automatically to suit the scene. |
|
Partial metering |
|
Effective when the background is much brighter than the subject due to backlighting, etc. Partial metering covers approx. 6.2% of the viewfinder area at the center. |
|
Spot metering |
|
This is for metering a specific spot of the subject or scene. The metering is weighted at the center covering approx. 1.5% of the viewfinder area. |
|
Center-weighted average metering |
|
The metering is weighted at the center and then averaged for the entire scene. |
Changing the metering mode
To change the metering mode, follow the steps below:
1. Set the power switch to <ON>.
2. With the camera ready to shoot, press the < > (Metering mode selection/White balance selection) button.
3. While looking at the viewfinder or LCD panel, turn the front dial.
This completes the metering mode changing.
|