Ask a Question

Registering a Paper Size

Article ID: ART134286 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

Registering a Paper Size

Solution

Registering a Paper Size
ID : 8201469100 _ EN _ 1
Solution

This printer cannot automatically detect the paper size. Therefore, you need to register the size of the loaded paper.
Register the paper size using the following procedure. (The paper size setting is set to [LTR] by default.)
NOTE
Precautions when specifying [Mixed Sizes]
  • The printer performs printing without checking the paper settings in the printer driver.
Make sure that the paper specified in the printer driver matches that loaded in the paper drawer before using the printer.
  • If you are using the UFR II printer driver, load custom size paper whose long edges are 8.50 in. (215.9 mm) or less in landscape orientation.

1. Press [ ] (Feeder Selection).

2. Select the paper source using [ ] and [ ], and then press [OK].
Select either [MP Tray Paper Size], [Drawer 1 Size] or [Drawer 2 Size].

3. Select a paper size using [ ] and [ ], and then press [OK].

-> Paper size is registered.


Related Info
Specifying a Paper Size

SIMS Doc Id

8201469100

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments