Setting the Flash (Flash On) (PowerShot ELPH 530 HS / 320 HS, IXUS 510 HS / 240 HS)
| Article ID: ART134372 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/15/2015 |
Description
Setting the Flash (Flash On) (PowerShot ELPH 530 HS / 320 HS, IXUS 510 HS / 240 HS)
Solution
| Setting the Flash (Flash On) (PowerShot ELPH 530 HS / 320 HS, IXUS 510 HS / 240 HS) ID
:
8201451700
_
EN
_
1
|
| Solution |
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
 ).
- The position and shape of the operation buttons, images displayed, and setting items may differ depending on the model you are using.
- In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
- [AUTO] (
 ), [High-speed Burst] (
 ), [Handheld NightScene] (
 ), [Low Light] (
 ), [Fireworks] (
 )*, [iFrame Movie] (
 ), [Super Slow Motion Movie] (
 )
* IXY 1 only
1. Press the
2. Touch (
 ).
3. The following screen will appear in the LCD screen.
Touch (
 ) to select it, and then touch (
) once again.
4. If the following icon is displayed on the monitor, this completes the setting process.
|
