How to set High-Speed Continuous Shooting (High-speed Burst)You can shoot continuously while the shutter button is pressed and held down fully.
The number of shots that can be taken in 1 second is as shown in the table below.

NOTE

• Recording pixels are fixed to (
  ).
• Focus, exposure and white balance settings are set with the first shot.
• Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
• As the number of images increases, the shooting interval may take longer.
• [ISO speed] is set to [AUTO] (
  ).
• When using Face ID, the location in the image where the name is recorded will be determined in the first shot, and will be recorded in the same place for further shots.
• The main functions that are not available in the [High-speed Burst] (
  ) mode are as follows:

- [Flash] (
), [Date Stamp], [Self-Timer] (


)

For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.

IMPORTANT

• The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.

1. Set the ) and then press the

2. Press the ) button.

3. The following screen appears on the LCD monitor.

Operate the ) will be displayed.)

Press the ) button.

4. Operate the ).

Press the ) button.

5. The following screen appears on the LCD monitor.

If the [High-speed Burst] (
) icon is displayed on the upper-right part of the screen, the setting is completed.

As long as you hold the down, the camera will shoot successive images.

Viewing Each Image in a Group (Group Playback)

When playing back images, images taken in [High-speed Burst](
)mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.

IMPORTANT

• If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.

REFERENCE

• To view images taken in [High-speed Burst] (
  ) mode as a group, press ) tab. (By default, [On] is selected.)

1. Choose an image group.

Operate the ).

Press the ) button.

2. The following screen appears.

Operate the ).

Press the ) button.

3. The following screen appears.

Operate the

To cancel group playback, press the ) button, choose (
) in the menu, and press the ) button again.

NOTE

• For information on How to set Continuous Shooting, please see the following.

-
PowerShot ELPH 520 HS / IXUS 500 HS

-
PowerShot ELPH 110 HS / IXUS 125 HS