Installing the Software Applications (Windows)
Article ID: ART134501 | | | Date published: 05/13/2015 | | | Date last updated: 11/16/2015 |
Description
Installing the Software Applications (Windows)
Solution
Installing the Software Applications (Windows) ID
:
8201008800
_
EN
_
3
|
|
Solution |
This section describes how to install the software applications on your computer.
1. Quit any software that is running.
2. Place the [DIGITAL CAMERA Solution Disk] CD-ROM supplied with your printer into the computer.
![]()
3. Click [Run SETUP.EXE] when the following window appears.
![]()
If the window above does not appear, click [Start] (
![]() ![]()
4. If the following window appears, click [Yes].
![]()
5. The following screen will appear. Select the area in which you live.
![]()
Select
![]() Click
![]()
6. The following screen will appear.
![]()
Click
![]()
7. The following screen will appear. Click [OK].
![]()
8. The following screen will appear. Click [Install].
![]()
9. The following screen will appear. Click [Yes] after reading the content carefully.
![]()
10. The following screen appears, and installation starts.
11. The following screen will appear. Click [Next].
![]()
12. The following screen may appear and if it does not, please proceed to step 14.
![]()
The following screen will appear. If you want to register later, select
![]() ![]()
13. The following screen will appear. Click [OK].
![]()
14. The following screen will appear. Click [Restart] to restart the computer and complete the installation.
![]()
If there is no need to restart the computer, the [Finish] screen will display. Click [Finish], remove the Solution Disk from the CD-ROM drive to conclude the installation.
|
SIMS Doc Id
8201008800