Set ECM TX to ON / OFF (MX512)

Article ID: ART134598 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Solution

Enabling / Disabling Error Correction Mode (ECM) TX

If there is noise on the phone line, sent faxes may include white horizontal lines across the page (like missing lines) or compressed lines; or, errors will appear on the display.

Make sure that the machine is turned on.

  1. Press the Menu button.

     

  2. Select Setup, then press the OK button.

  3. Select Device settings, then press the OK button.



  4. Use the UPDOWN button to select Fax settings, then press the OK button.
  5. Use the UPDOWN button to select Advanced FAX settings, then press the OK button.
  6. Use the UPDOWN button to select Adv. communication settings, then press the OK button.

  7. Use the UPDOWN button to select ECM TX , then press the OK button.

  8. Use the UPDOWN button to select On or Off, then press the OK button


    • OFF: The machine will not send a fax using ECM. Transmission may be faster. However, the image quality will suffer if there is noise on the phone line.
    • ON: Image quality will be good if there is noise on the phone line.

  9. Press the FAX button to return to standby mode.




Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments