You can copy your recordings from the built-in memory to a memory card. Scenes and photos will be copied from the index screen or from a story in the gallery in the built-in memory to the same index screen or story on the memory card.
Copying Scenes from the [AVCHD Movies] or [MP4 Movies] Index Screen
1. Open the [AVCHD Movies] or [MP4 Movies] index screen.
- Check that you have selected the & (built-in memory) tab.
REFERENCE
For AVCHD movies, to copy all the scenes recorded on a specific date, drag your finger left/right until the desired date appears in the title bar.
2. Select the scenes to copy.
2-1. Touch [Edit].
2-2. Touch [Copy (
 ) ].
2-3. Touch the desired option.
date | Copy all the scenes recorded on the date shown in the control button. For AVCHD movies only. |
Select | Select individual scenes to copy. |
All Scenes | Copy all the scenes. |
3. To select individual scenes
3-1. Touch on the individual scenes you want to copy.
A checkmark
 will appear on the scenes you touch. The total number of selected scenes will appear next to the
 icon.
Touch a selected scene to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes].
3-2. After selecting all the desired scenes, touch [OK].
4. Copy the scenes.
4-1. Touch [Yes]*.
*Touch [Stop] to interrupt the operation while it is in progress.
4-2. Touch [OK].
Copying Scenes from a Story by Rating
1. Touch [
 ] and then touch [AVCHD Gallery].
- Check that you have selected the
(built-in memory) tab.
2. Drag your finger right/left to bring the desired story to the front.
3. Touch [Story Details].
4. Touch [Select by Rating].
5. Desired rating marker corresponding to the rating of the scenes to copy, and then touch [
 ].
6. Copy all the applicable scenes.
6-1. Touch [Edit Story] > [Copy (
 ) ] in that order.
6-2. Touch [Yes].
Touch [Stop] to interrupt the operation while it is in progress.
7. Touch [OK].
Copying a Single Photo
1. In single photo view, select the photo you want to copy.
2. Touch the screen to display the playback controls.
3. Copy the photo.
3-1. Touch [Edit].
3-2. Touch [Copy (
 ) ].
3-3. Touch [Proceed].
3-4. Touch [Yes].
4. Drag your finger left/right to select another photo to copy or
touch [
 ].
Copying Photos from the Index Screen
1. Open the [Photos] index screen.
Check that you have selected the
 (built-in memory) tab.
2. Touch [Edit].
3. Touch [Copy (
 ) ].
4. Touch [Select] or [All Photos].
5.To select individual photos
5-1.Touch on the individual photos you want to copy.
- A checkmark
will appear on the photos you touch. The total number of selected photos will appear next to the
icon.
- Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes].
6. Touch [Yes}.
7. Touch [OK].
CAUTION
- Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder?????????s operating mode.
- When copying photos onto an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use.
NOTE
- In the following cases, you will not be able to copy recordings to the memory card:
- If the memory card slot cover is open.
- If the LOCK switch on the memory card is set to prevent writing.
- If the file numbering is at maximum.
- If there is no memory card in the memory card slot.
- Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder cannot be copied to the memory card.
- If there is not enough space on the memory card, as many files as possible will be copied before stopping the operation.
|