There are two methods of redialing: Automatic redialing and Manual redialing.

• Automatic Redialing

  If you send a document and the recipient's line is busy, the machine will redial the number after a specified interval.

  Automatic Redialing

• Manual Redialing

  You can redial to the recipients dialed using the Numeric buttons.

  Manual Redialing

• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them after speaking on the telephone.

  Sending a Fax after Speaking on Telephone

• Automatic redialing is enabled by default.

• For details on the basic sending operations:

  Sending Faxes with the Numeric Buttons

Automatic Redialing

You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the maximum number of redial attempts and the length of time the machine waits between redial attempts.

Enable and specify the automatic redialing setting on Auto redial in Adv. FAX settings under Fax settings.

• While automatic redialing, the unsent fax is stored in the machine's memory temporarily until the sending fax is complete. If a power failure occurs or you unplug the power cord before automatic redialing is complete, all faxes stored in the machine's memory are deleted and not sent.

• To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.

• To cancel automatic redialing, delete the unsent fax from the machine's memory while the machine is on-standby for a redial operation. For details, see Deleting a Document in Machine's Memory.

Manual Redialing

Follow the procedure below for manual redialing.

1. Make sure that the machine is turned on.

2. Press the FAX button.

   The Fax standby screen is displayed.

3. Load documents on the platen glass or in the ADF.

   Loading Originals

4. Adjust the scan contrast and resolution as necessary.

   Note

   • For details on how to adjust the scan contrast and resolution, see Sending Faxes with the Numeric Buttons.

5. Press the Menu button.

   The FAX menu screen is displayed.

6. Use the button to select Redial, then press the OK button.

   The Redial screen is displayed.

   

7. Use the button to select the recipient's number to redial, then press the OK button.

8. Press the Color button for color transmission, or the Black button for black & white transmission.

   Important

   • Color transmission is available only when the recipient's fax machine supports color faxing.

• For manual redialing, the machine memorizes up to 10 recent recipients dialed using the Numeric buttons. Note that the machine does not memorize any recipients dialed using the memory dialing or the manual redialing.

• To cancel manual redialing, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD.

• If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Close the feeder cover [OK]Eject the document is displayed on the LCD. By pressing the OK button, the remaining documents are automatically ejected.