Ask a Question

Printer will not come out of sleep mode.

Article ID: ART135243 | Date published: 05/13/2015 | Date last updated: 03/27/2019
Thank you for taking the time to give us your feedback.
 

Description

In order to "wake" the printer after being in sleep mode for more than 8 hours, the printer must be restarted.

Solution

 

In order to qualify for the "Energy Star" certification, the printer must power down after being in sleep mode for more than 8 hours.

If you do not wish to have to perform a restart after the printer has been in sleep mode for more than 8 hours, you can set the Shut Down Timer to "OFF" (the default setting is "8 hours").

To change the Shut Down Timer, follow these steps: 

  1. On the Tab Selection screen of the Control Panel, press  or  to select Settings/Adj. tab ( ).

     
     
  2. Press the OK button.The Set./Adj. Menu is displayed.
  3. Press or to select System Setup, and then press the OK button.
  4. Press  or to select ShutDown Timer, and then press the OK button.
  5. Press or  to select "OFF", and then press the OK button.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments