"P," "0," and "7" are alternately displayed on LED
Article ID: ART135319 | Date published: 05/13/2015 | Date last updated: 07/23/2019
 

Description

"P," "0," and "7" are alternately displayed on LED

Solution

 

When "P," "0," and "7" are alternately displayed on LED while the power lamp and the error lamp of the main unit alternately blink, the ink absorber requires a replacement. The printer is out of service until the ink absorber is replaced.
However, it cannot be replaced by yourself.
Push the power button to turn OFF the printer, and then contact the service center for replacement.
Service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 

What is "ink absorber" ?

 

Ink absorber absorbs the ink used when Cleaning is executed.
In order to maintain the best printing, the ink used when Cleaning is absorbed into the ink absorber inside the printer. The ink absorber requires the replacement when it is full. However, it cannot be replaced by yourself. Therefore, when the message is displayed, we recommend that you contact the service center as quickly as possible. For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 

 

Precautions for using or moving the printer

 

If the printer is upright or tilted, it may be damaged, or the ink may leak from the main unit of the printer. When you move the printer for repair, do not tilt the printer.

 

 

SIMS Doc Id

8201162300