The environment necessary for the wireless connection Before connecting this printer to the network, confirm the following two items, (A) and (B). (A) Access point or router (supporting IEEE802.11b/g/n) An access point or router is a relay device which connects not only the Internet and network devices such as a computer or printer, but also one network device to another. So, your access point or router must be properly set before you go to the next setup step. (B) The computer to be used with the printer must be connected to the network. In order to confirm whether the computer to be used with the printer is connected to the network, try to browse the Internet website from the computer. The procedures for the wireless connection In order to use the printer in a wireless connection, follow the procedures below. In order to use the printer in a wireless connection even after the USB connection is completed, follow the procedures below to perform the wireless setup again.
1. Select the wireless setup method. To use the printer in a wireless connection, select the wireless setup method you prefer. 2. Perform the wireless setting from the operation panel. Perform the setting based on the setup method you selected in the step 1 using the operation panel. 3. Install the software. Install the software into the computer used with the printer. 4. Perform the test printing. Try wireless printing to confirm whether the wireless setup has been performed properly. 1. Select the wireless setup method. To use the printer in the wireless connection, first select the wireless setup method. - Standard setup connection: Perform the wireless setup manually. In most cases, you can create a wireless environment using this setup method. - WPS connection: If the access point or the router you are using supports the WPS function, you can use this setup method to connect the printer in a wireless connection. Confirm that the access point or the router you are using has the WPS button.
 REFERENCE - There is the WPS mark
 on the access point or the router you are using if it supports the WPS function.
2. Perform the wireless setup depending on the setup method IMPORTANT - Quit all applications before installation.
- Internet connection may be required during the installation. Connection fees apply.
Screens are based on Mac OS X v.10.7. Actual screens may differ depending on the OS version. 1. Insert the CD-ROM into the computer. IMPORTANT If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.
2. Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK. If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. If you do not know your administrator name or password, click the help button, then follow the on-screen instructions. REFERENCE If the CD-ROM does not autorun: Double-click the CD-ROM icon on the desktop.
3. Click Change Connection Method. 4. Click Network Connection. 5. Click Wireless Connection. Follow the instruction and go to step 6. REFERENCE If an error message is displayed, see "Troubleshooting" at the right.
6. - WPS connection: When the screen left above is displayed, go to the step (A). When the screen right above is displayed, go to the step (B). (A) Click Push Button Method. -> Go to 7. (B) Click Other Methods. Click WPS. - Standard setup connection: Click Other Methods. Click Standard setup. 7. Follow the instruction until the screen below is displayed. Network connection setting is complete. Click Next. Install the Software (Information) Let's perform the software installation. 1. Click Next. Follow any on-screen instructions to proceed with the software installation. 2. Click Add Printer. REFERENCE - The alphanumeric characters after Canon xxx series is the machine's Bonjour service name or MAC address.
- If the machine is not detected, make sure of the following.
- The machine is turned on. - The firewall function of any security software is turned off. - The computer is connected to the access point.
REFERENCE XXX: xxx refers to the model name you are using.
3. Select Canon xxx series Canon IJ Network and click Add. CAUTION If you will be installing the Canon printer driver on Mac OS X and using the printer through a network connection, you can select [Bonjour] or [Canon IJ Network] in the [Add Printer] dialog. If [Bonjour] is selected, remaining ink level messages may differ from those indicated by [Canon IJ Network]. Canon recommends you to use [Canon IJ Network] for printing.
4. Click Next. REFERENCE
5. Click Exit to complete the installation. Remove the Setup CD-ROM and keep it in a safe place. 6. Solution Menu EX starts. The end of the procedure of the wireless LAN setup.
| 
