Ask a Question

Placing Cards in the Scanner

Article ID: ART135689 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

Follow these steps to place cards in the scanner.

Solution

 

Placing Cards

1 Switch the feed selection lever to (Bypass)

 

 

  • When scanning cards, make sure to set the feed selection lever to (Bypass).
  • Place cards one at a time.

2   Place the card horizontally, with the reverse side facing you, and the top of the card facing down.

Adjust the document guides to fit the width of the card.

 

 

  • If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. Be sure to place the cards horizontally.

 

  • Ultrasonic double feed detection will not function properly when scanning cards. Clear the [Detect by Ultrasonic] check box in the [Feeding] tab.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments