Ask a Question

Adjusting the Printhead (iPF750/iPF755/iPF760/iPF765)

Article ID: ART135885 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

Adjusting the Printhead (iPF750/iPF755/iPF760/iPF765)

Solution

Adjusting the Printhead (iPF750/iPF755/iPF760/iPF765)
ID: 8200534700_ EN_ 3
Issue

If printed documents are affected by the following problems, try adjusting the printhead.
  • Printing is faint or affected by banding in different colors
  • Printed vertical lines are warped or colors are out of alignment
  • Printed lines are misaligned
  • Paper rubs against the printhead, or image edges are blurred
Cause


Summary

  • Printing is faint or affected by banding in different colors
Execute Nozzle Check to check for printhead nozzle clogging.
See AlsoChecking for Nozzle Clogging (iPF750/iPF755/iPF760/iPF765)
Cause


Summary

  • Printed vertical lines are warped or colors are out of alignment
Execute Head Posi. Adj. to adjust the printhead position.
Normally, execute Auto(Standard) or Auto(Advanced). However, when using special paper or if printing is not improved after executing Auto(Advanced), try Manual Adjustment.
See AlsoAutomatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.) (iPF750/iPF755/iPF760/iPF765)
See AlsoManual Adjustment to Straighten Lines and Colors (Head Posi. Adj.) (iPF750/iPF755/iPF760/iPF765)
Cause


Summary

  • Printed lines are misaligned
Execute Head Inc. Adj. to adjust the angle of inclination of the printhead.
Even slight misalignment can be corrected.
See AlsoAdjusting Line Misalignment (Head Inc. Adj.) (iPF750/iPF755/iPF760/iPF765)
Cause


Summary

  • Paper rubs against the printhead, or image edges are blurred
Executing Head Height Adjustment to adjust head height may improve printing results.
See AlsoTroubleshooting Paper Abrasion and Blurry Images (Head Height) (iPF750/iPF755/iPF760/iPF765)

SIMS Doc Id

8200534700

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments