Alarm LED Flashes Orange

When a printer error occurs, the Alarm LED (light) flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error.

 

(A) Note the number of flashes

(B) Flashes repeatedly

• Number of flashes/Cause
  
• Eleven flashes: Automatic Print Head Alignment failed.
  
• Action to correct the error
  
• Print Head nozzles are clogged.
  Press the RESUME/CANCEL button to dismiss the error, and print the nozzle check pattern to check the status of the Print Head.
  
• Paper of size other than A4 or Letter is loaded.
  Press the RESUME/CANCEL button to dismiss the error, then load one sheet of A4/Letter-sized plain paper.
  

• The Paper Output Slot is exposed to strong light.
  Press the RESUME/CANCEL button to dismiss the error, and then adjust your operating environment and/or the position of the printer so that the Paper Output Slot is not exposed directly to strong light.

• After carrying out the above measures, if the problem continues after aligning the Print Head again, press the RESUME/CANCEL button to dismiss the error, and then perform Manual Print Head Alignme

(7) ON button / POWER LED

(8) RESUME/CANCEL button / Alarm LED